Frequency, amplitude, operating torque, centrifugal force and acceleration are the technical values of the vibration motor. Depending on the applications, these technical data should be considered. Circular motion is obtained by using only one vibration motor and linear motion is obtained by using two (2).
| Application | Frequency | Acclerations | Amplitude | Vibration Direction |
|---|---|---|---|---|
| Feeding, Dosaging | 1000-1500 | 2,0 - 3,5 | Big | Linear |
| Sieving | 1000-1500 | 3,0 - 4,0 | Big | Linear |
| Filter cleaning | 1500-3000 | 3,5 - 5,0 | Middle | Linear |
| Silo excretion | 1500-3000 | %20 of metarial | Middle | Circular |
| Pressing | 1500-6000 | 2,0 - 4,0 | Small | Circular/Linear |
| Concrete pressing | 3000-9000 | 0,8 - 1,15 | Too small | Circular/Linear |
| Testing table | 3000-6600 | 0,5 - 5,0 | Small/Big | Circular/Linear |
| Degree | Application |
|---|---|
| 25 - 35 | Feeding, Loading, Seperating, Dosaging |
| 30 - 45 | Sieving, Classification, Separation |
| 45 - 80 | Drying |
| Vibration Frequency | Vessel Lenght | Oscillation |
|---|---|---|
| 3000 rpm (2 poles) | Maximum 3000 mm | 0,5 - 2 mm |
| 1500 rpm (4 poles) | Maximum 4800 mm | 4 - 6 mm |
| 1000 rpm (6 poles) | Maximum 6000 mm | 6 -12 mm |
| 750 rpm (8 poles) | Maximum 6800 mm | 10 - 16 mm |
